BMC
Noocyada 'E-Glass' oo la jarjaray oo loogu talagalay BMC waxaa si gaar ah loogu talagalay in lagu xoojiyo polyester-ka unsaturated, epoxy resin iyo phenolic resins.
Astaamaha
Integrity Daacadnimo wanaagsan
Stat Ma guurto iyo fuzz hooseeya
Distribution Si dhakhso ah oo isku mid ah ugu ekaysiiya cusbada
Properties Qalabka farsamada iyo farsamaynta wanaagsan
Nidaamka BMC
Xarunta wax u sameynta badan ayaa lagu sameeyaa iyadoo la isku darayo silsilado jarjaran oo galaas ah, cusbi, filler, xoojiye iyo waxyaabo kale oo lagu daro, Xaruntan waxaa lagu farsameeyaa isku xoqid ama isku duro cirbad si loo sameeyo qaybaha isku dhafan ee dhammaaday
Codsiga
E Muraayadaha la jarjaray ee BMC waxaa si ballaaran loogu isticmaalaa gaadiidka, dhismaha, elektaroniga, warshadaha kiimikada iyo warshadaha nalka. Sida qaybaha baabuurta, insulatorka iyo sanaadiiqda biiro.
Liiska alaabta
|
Shayga No. |
Dheer dherer, mm |
Is-waafajinta cusbada |
Astaamaha |
|
BH-01 |
3,4.5,6,12,25 |
UP |
Socodka wanaagsan, Daacadnimada heerka sare |
|
BH-02 |
3,4.5,6,12,25 |
UP, EP, PF |
Joogto yar, socodka wanaagsan, Hufnaan xadidan oo sare |
|
BH-03 |
3,4.5,6 |
PF |
Dhaqdhaqaaq wanaagsan, Daacadnimo heer sare ah, Awood sare |
|
BH-04C |
3,4.5,6,12,18 |
UP, EP, PF |
Qeybaha la jarjaray ee joogtada ah, xitaa kala firdhinta inta lagu guda jiro kicinta, haynta sare ee dhererka garoobka, qulqulka sare ee alaabooyinka isku dhafan, isticmaalka suurtagalka ah ee isku dhafka tayada midabka sare leh. |
Aqoonsiga
|
Nooca Muraayadda |
E |
|
Xargaha la jarjaray |
CS |
|
Ballaca Balaastiigga, μm |
13 |
|
Dheer dherer, mm |
3,4.5,6,12,18,25 |
|
Xeerka qiyaasta |
BH-BMC |
Halbeegyada Farsamada
|
Ballaca balaastigga (%) |
Mawduuca Qoyaanka (%) |
Mawduuca LOI (%) |
Dhererka jaranjarooyinka (mm) |
|
ISO1888 |
ISO3344 |
ISO1887 |
Q / BH J0361 |
|
. 10 |
.100.10 |
0.85 ± 0.15 |
± 1.0 |